LED Controllers.
LED remote controllers.
LED DMX controllers.

Galaxy Star Ceiling

The galaxy star ceiling.

This fantastic product is available now direct from Starscape. Order on line or by phone. For more information visit the Galaxy link under star ceilings main navigation bar or click here.

LED Lighting

LED Controllers

Controllers for RGB strips and tape.

Unlike the single colour LED's, which simply need a transformer, the RGB rigid strips and flexible tape need a controller through which you select colours and colour change effects. So, your first step is to decide on the level of control that you want. Our RGB controller allows you to select static colours and colour change sequences.

Our more expensive DMX controller offers more control over colours, with very smooth transitions and the ability to select specific Red, Green and Blue values to create custom colours.

Please call us to place an order from this page.

RGB colour mixing controller

Infinite colour mixing possibilities, dimming, colour hue adjustment and on-board programmes make this the budget remote controller of choice. Input 12volts, output 200 watts 12 volts.

RGB Colour Mixing Remote Controller (STARMIXER) £84.00

RGB controller.

Affordable remote controller. Power output 220watts at 12 volts, 8 speed levels and 8 dimming levels. Colour changing has 17 modes. Controllable from push buttons on the unit or via radio remote control.

RGB Controller (STARCONLT) £66.00
When this controller is switched off and then on again it remembers the last input and resumes the programme.
More info here

RGB signal amplifier.

When the wattage output capacity of a controller is reached additional LED strips or tape can be connected via the signal amplifier. Unlimited additional LEDs are theoretically possible.

Input 12volts. Maximum output 216 watts @ 12volts

Power expansion module (STARPEM2) £54.00 More info here and here.

Mini remote control dimmer for single colour LED's.

12~24VDC, L125*W53*H34 mm (L4.92*W2.07*H1.34 inch).
60W (12VDC), 120W (24VDC)
Low power dimmer for smaller runs of single colour strips. It will dim 8 metres of our single colour tape or 23 of our single colour rigid strips.
Dim longer runs of tape or strips by using the Mini remote control dimmer in conjunction with the above Power Expansion Module. The Power Expansion Module has an output of 216 watts so will comfortably power and dim 80 of our single colour rigid strips or 4 rolls of flexible tape.
Remote control dimmer £ 39.50 Code: STARDIM
RGB LED controller

DMX controller.

This unit is more sophisticated with more than 30 selectable RGB colour changing patterns. It can also work with a standard DMX signal generator (DMX console, PC with effects generator software). As a stand-alone unit it is very easy to set up and use. When this controller is switched off and then on again it remembers the last input and resumes the programme. 12VDC or 24VDC 228W (12VDC) 660W (24VDC)
DMX controller £213.50 Code:STARDMX. More info here.
Will work in conjunction with the Power expansion module.
Wall plate controller . Stylish controller to fit 2 gang back box. 12 programme settings with fade and colour mixing. cat5 cabling.
Wall plate controller, wall plate power supply and DMX module: £295.00
Code: STARPLATE
For a more detailed explanation look here.

 

 

Red Green Blue and common (Black) 4 core cable. Use to connect strips or tape to controllers or amplifiers.