|
We manufacture 4 sizes of common end ferrule to suit a wide variety of fibre numbers and thicknesses. £12.00 |
|
Hot knife. Robust hot knife with 2 inch blade ideal for trimming single fibres or bundles of fibre at a common end. Also good for clean cutting and sealing Nylon and Polypropylene rope. £20.00 |
|
Sample Pack
Our sample pack is intended to allow customers to get some insight into the properties of different sizes of optical fibre at the planning stage of their project. (Contains 3 metres each of 0.75 and 1.50mm unsheathed Polymer Optical Fibre and 1 metre of 1.00mm sheathed fibre and two Acrylic end fittings.) If we have spare fibre in the workshop you may well receive additional samples in your pack. £2.50 |
|
Weatherproof light source enclosure 380 x 300 x 190mm. £55.00 |
|
| |
|
Plug in socket remote control package. Simple radio remote switching. This unit plugs into a standard 3 pin socked and the plug from your light source plugs into the unit. (Manufacturer may vary)£10.00 |
|
75 watt halogen replacement bulb. £4.50 |
|
100 watt halogen replacement bulb. £12.50 |
|
150w Metal Halide replacement bulb. £40.00 |
|
250w Metal Halide replacement bulb. £55.00 |
|
1mm hss drill bit. £0.50 |
|
ISR adhesive black. The best we’ve found for securing fibres. Very strong, flexible and will not damage fibre coating. Skin in ½ hour fully cured in about 12-24 depending on temperature. £13.50
|
|
Basic black Silicone adhesive. Not as strong as the ISR but OK for general fibre installation. £5.00 |
|
|
