Fibre End Trims
Starscape domed acrylic end fittings give a very different look to a fibre optic display for use where achieving a starry sky effect is not your main aim. The dome can be viewed from all angles and installation is very easy. The fittings are supplied with two sizes of flexible inserts to accept both 0.75mm and 1.00mm fibres.
 |
 |
 |
 |
| 1) Determine the position of the end fittings and then drill your holes using a 6.5mm bit. | 2) Introduce the fibre and push on the insert. |
 |
 |
| 3) Push the insert firmly into the fitting. | 4) Push the completed fitting into the board. |
 |
 |
| 5) Turn on the power! | Photo showing the comparison between the domed end fitting and a bare 1.00mm fibre. As you can see, the bare fibre looks far more star like. |
 |
 |
| Domed end fitting dimensions | Insert dimensions |
Tip!