LED Rigid Strips
Bright Rigid 700mm RGB LED strips
For a combination of colour choice and brightness our rigid RGB LED strips are an excellent option for colour wash lighting schemes. These low profile strips can easly be incorporated in kitchen under cupboard lighting, skirting, dado rails, picture rails or coving to cast light up or down a wall or across a ceiling or floor. They could also be used to illuminate stair risers. The strip is supplied with a clear plastic casing which can be used to give it a certain limited degree of weather resistance, but it is not designed as an outdoor product.
Each strip has 30 RGB LEDs on it, by contrast with other strips which are either single colour or have alternating red, green and blue LEDs. So, where budget permits, this is the LED strip of choice.
The 70 cm strips daisy chain together for a simple modular installation and can be cut down to length where required, (the strip is modular in design with LEDs in sections of three).
The strips have a lifetime of 50,000 hours and are used with a transformer and a separate controller for colour selection.
 |
 |
 |
| Rigid strip showing connector | The connectors are supplied approx. 45mm long and can be cut and re-joined to extend or shorten the run. | Strips can be cut to length with sharp scissors. Cutting positions are clearly marked. |
Size: 700 x 8 x 7mm
Operating Voltage: 12v DC
Color: RGB
30 LEDs
Lumens: 144 lm (Max)
Power Consumption: 7.2 W (Max)
Beam Angle: 120°
Single colour 20mA single colour LED rigid strips
Cost efficiency and ease of installation make these single colour strips a good choice for all kinds of display lighting.
Size:
480 x 9 x 7mm (cool white)
500 x 9 x 7mm (warm white)
500 x 9 x 7mm (blue)
Operating Voltage: 12 VDC
Colour: Single colour.
30 LEDs
Power Consumption: 2.4 W per strip
Beam Angle: 120°
LED power supplies
LED controllers