Accessories that may assist in your fibre optic project.
Hard wire power supplyIf making provision for a switched 13 amp socked adjacent to the light source location in the loft space is not practical, then this 48 watt LED power supply may be the answer. Wire it into the lighting circuit and control your star ceiling display from a standard wall switch. This transformer will power any of our MiniLED range of light sources. Keep safe and always consult a qualified person.
Hot knifeIf you have a lot of fibres to cut, or you are finishing your own common end then this 240v hot knife is a tool to consider.
Our sample pack is intended to allow customers to get some insight into the properties of different sizes of optical fibre at the planning stage of their project. (Contains 3 metres each of 0.75 and 1.50mm unsheathed Polymer Optical Fibre, 1 metre of 1.00mm sheathed fibre, 1.0 metre of wired sparkle fibre and 0.5 of a metre of 1.5mm side glow). If we have spare fibre in the workshop you may well receive additional samples in your pack. £3.00
The processing of small fibre orders involves handling and administration costs which are often out of all proportion to the value of the fibre itself - in fact, most other fibre optic firms simply don't offer this service - and this is reflected in what might appear to be a high postage and packing charge. The value of the sample pack contents actually exceeds the £2.50 shown. If you do go ahead with a project which requires the purchase of additional fibre and a light source, we will be happy to credit the cost of your sample pack towards that additional purchase.
Hippo professional construction adhesive.Grips the fibres well, is odourless, and sticks well to virtually any dust free surface.
General purpose Silicone adhesive.